1. sausagedog's Avatar
    Will it also bring back the photo roll
    2009-10-08 12:17 PM
  2. MAKAVE71's Avatar
    it might bring it back if u sync it with itunes i beleave it should

    why dont u just backup ur camera roll now before u replace the files ?

    when u plug ur iphone to computer and go to my computer it shoudl show ur iphone there and ur pics should be in there as well

    can a MOD STICKY this please im sure alot of people will run into this in the next few days
    Last edited by MAKAVE71; 2009-10-08 at 12:37 PM. Reason: Automerged Doublepost
    2009-10-08 12:37 PM
  3. bradyramone's Avatar
    where do i put these files please?
    2009-10-08 02:08 PM
  4. Morich_222's Avatar
    Originally Posted by bradyramone
    where?

    where do i put these files please?
    Instructions - Fixing Caused Problems From iPhone 3G Camera Focus Tweak on Cydia.

    NOTE: - Your iPhone needs OpenSSH (Available on Cydia) installed on it.
    - This process should fix your photos and camera from not opening and was successful in fixing this problem on my iPhone 3G with OS 3.0 Firmware.
    - As MAKAVE71 said DONT DELETE BUT REPLACE FOLDERS
    --------------------------------------------------------------------------

    Camera Files
    1. Download the camera files from attachment (Thanks to crus1971).

    2. Once downloaded extract the files.

    WinSCP
    1. Get WinSCP from here.

    2. After installing, launch WinSCP.

    3. Connect to your Wi-Fi network from your iPhone.

    4. Now launch WinSCP

    5. Now under host name, type your iPhone IP address. (To find your IP address, just go to Settings -> Wi-Fi -> and click on the blue network next to the network you're connected to)

    4. Don't fill in anything else, and press login.

    5. It might say something about a cache, just read the message, and press whichever one continues with the process.

    6. Now it'll ask for a username and password. Try these two combinations. Depending on your firmware, one of them will work.

    Username: root
    Password: alpine

    Username: root
    Password: dottie

    7. You're in! Now you have full access to your iPhone on your computer using Wi-Fi.
    --------------------------------------------------------------------------

    1. In the open window, press up until you cannot go any further.

    2. Go to: System->Library.

    3. Open the camera files downloaded.

    4. Open all folders until you reach: CoreServices, PrivateFrameworks, VideoDecoders, VideoEncoders.

    5. Open CoreServices->SpringBoard.app and select all files in that folder.

    6. Open WinSCP tab, then open CoreServices->SpringBoard.app then drag and drop the files into that folder.

    7. Go Back to camera files, hit back twice then open PrivateFrameworks->Camera.Framework select the files in that folder.

    8. Back to WinSCP tab, and hit back twice and open PrivateFrameworks->Camera.Framework and drag and drop the files into that folder.

    9. Back to camera files, hit back twice and open VideoDecoders select those files and drag and drop them into the VideoDecoders folder back in WinSCP.

    10. Back to camera files, hit back and open VideoEncoders select those files and drag and drop them into the VideoEncoders folder back in WinSCP.

    11. Quit WinSCP [F10]

    12. Open your iPhone and you can once again access camera and pictures.
    --------------------------------------------------------------------------

    [Many thanks to crus1971 for the camera files]
    Attached Files
    Last edited by Morich_222; 2009-10-08 at 03:24 PM.
    2009-10-08 02:22 PM
  5. BASNAN's Avatar
    Good job
    2009-10-08 02:42 PM
  6. gabesir's Avatar
    stupid fix! someone needs to remove this from the repo!
    2009-10-08 02:50 PM
  7. sausagedog's Avatar
    thats cool will try that tnight,also off topic ive just pluygged it int omy work mac and it cant even see it no charging no connection sound nothing could this be something to do with the app,works fine on windows
    2009-10-08 03:00 PM
  8. Lecram25's Avatar
    Also YouTube .app videos don't play.
    Someone use ifile.app to copy MobileSildeShow.app and post it up.
    iPhone 3g FW 3.0 or host it on cydia?
    Any fix for YouTube?
    2009-10-08 04:37 PM
  9. cfriedberg's Avatar
    what about for us Mac users? can anyone help us?
    2009-10-08 05:10 PM
  10. pillzny's Avatar
    Thanks Crus1971
    I installed this when i woke up this morning b4 work only to end up in that death circle thing. I replaced the files from your zip and im back in action.
    If it helps anyone else, I was missing a folder or two which I made and then dropped the files in... Back to Normal
    2009-10-08 05:58 PM
  11. Jo730's Avatar
    Hi Guys. I had the same problem. I was lucky, my friend has 3G with 3.01 FW so I took the files from his phone and copied to mine. So my procedure was, I uninstalled 3G camera focus, rebooted and coppied attached files. Everything works again now. Hope this helps.
    Last night I uninstalled Camera Mod on Cydia and rebooted the phone and my phone was still working except for the camera and camera roll ofcourse. Today when I woke up I was so excited seeing there was a fix for it, and I didn't wait to see the second page of the thread.. not knowing that I was suppose to just replace.. what i did was I deleted the 4 folders in the iphone and then I dragged the 4 folders into the iphone.

    Now my phone is stuck at the white apple logo. Think I have to restore the phone now. =(
    2009-10-08 06:29 PM
  12. jbua5150's Avatar
    Instructions - Fixing Caused Problems From iPhone 3G Camera Focus Tweak on Cydia.

    NOTE: - Your iPhone needs OpenSSH (Available on Cydia) installed on it.
    - This process should fix your photos and camera from not opening and was successful in fixing this problem on my iPhone 3G with OS 3.0 Firmware.
    - As MAKAVE71 said DONT DELETE BUT REPLACE FOLDERS
    --------------------------------------------------------------------------

    Camera Files
    1. Download the camera files from attachment (Thanks to crus1971).

    2. Once downloaded extract the files.

    WinSCP
    1. Get WinSCP from here.

    2. After installing, launch WinSCP.

    3. Connect to your Wi-Fi network from your iPhone.

    4. Now launch WinSCP

    5. Now under host name, type your iPhone IP address. (To find your IP address, just go to Settings -> Wi-Fi -> and click on the blue network next to the network you're connected to)

    4. Don't fill in anything else, and press login.

    5. It might say something about a cache, just read the message, and press whichever one continues with the process.

    6. Now it'll ask for a username and password. Try these two combinations. Depending on your firmware, one of them will work.

    Username: root
    Password: alpine

    Username: root
    Password: dottie

    7. You're in! Now you have full access to your iPhone on your computer using Wi-Fi.
    --------------------------------------------------------------------------

    1. In the open window, press up until you cannot go any further.

    2. Go to: System->Library.

    3. Open the camera files downloaded.

    4. Open all folders until you reach: CoreServices, PrivateFrameworks, VideoDecoders, VideoEncoders.

    5. Open CoreServices->SpringBoard.app and select all files in that folder.

    6. Open WinSCP tab, then open CoreServices->SpringBoard.app then drag and drop the files into that folder.

    7. Go Back to camera files, hit back twice then open PrivateFrameworks->Camera.Framework select the files in that folder.

    8. Back to WinSCP tab, and hit back twice and open PrivateFrameworks->Camera.Framework and drag and drop the files into that folder.

    9. Back to camera files, hit back twice and open VideoDecoders select those files and drag and drop them into the VideoDecoders folder back in WinSCP.

    10. Back to camera files, hit back and open VideoEncoders select those files and drag and drop them into the VideoEncoders folder back in WinSCP.

    11. Quit WinSCP [F10]

    12. Open your iPhone and you can once again access camera and pictures.
    --------------------------------------------------------------------------

    [Many thanks to crus1971 for the camera files]

    This worked for me! Even saved my camera roll! Thanks!!!
    2009-10-08 06:53 PM
  13. purple2010's Avatar
    Thanks for the fix. My youtube works but only music and no video. Anyone having the same issue?
    2009-10-08 07:17 PM
  14. Silvercelica18's Avatar
    I have the same problem on 3.0 firmware and if any body knows what to do with that unzip file there talking about can somebody please tell me what to do with it.
    2009-10-08 07:26 PM
  15. HDoan112's Avatar
    Instructions - Fixing Caused Problems From iPhone 3G Camera Focus Tweak on Cydia.

    NOTE: - Your iPhone needs OpenSSH (Available on Cydia) installed on it.
    - This process should fix your photos and camera from not opening and was successful in fixing this problem on my iPhone 3G with OS 3.0 Firmware.
    - As MAKAVE71 said DONT DELETE BUT REPLACE FOLDERS
    --------------------------------------------------------------------------

    Camera Files
    1. Download the camera files from attachment (Thanks to crus1971).

    2. Once downloaded extract the files.

    WinSCP
    1. Get WinSCP from here.

    2. After installing, launch WinSCP.

    3. Connect to your Wi-Fi network from your iPhone.

    4. Now launch WinSCP

    5. Now under host name, type your iPhone IP address. (To find your IP address, just go to Settings -> Wi-Fi -> and click on the blue network next to the network you're connected to)

    4. Don't fill in anything else, and press login.

    5. It might say something about a cache, just read the message, and press whichever one continues with the process.

    6. Now it'll ask for a username and password. Try these two combinations. Depending on your firmware, one of them will work.

    Username: root
    Password: alpine

    Username: root
    Password: dottie

    7. You're in! Now you have full access to your iPhone on your computer using Wi-Fi.
    --------------------------------------------------------------------------

    1. In the open window, press up until you cannot go any further.

    2. Go to: System->Library.

    3. Open the camera files downloaded.

    4. Open all folders until you reach: CoreServices, PrivateFrameworks, VideoDecoders, VideoEncoders.

    5. Open CoreServices->SpringBoard.app and select all files in that folder.

    6. Open WinSCP tab, then open CoreServices->SpringBoard.app then drag and drop the files into that folder.

    7. Go Back to camera files, hit back twice then open PrivateFrameworks->Camera.Framework select the files in that folder.

    8. Back to WinSCP tab, and hit back twice and open PrivateFrameworks->Camera.Framework and drag and drop the files into that folder.

    9. Back to camera files, hit back twice and open VideoDecoders select those files and drag and drop them into the VideoDecoders folder back in WinSCP.

    10. Back to camera files, hit back and open VideoEncoders select those files and drag and drop them into the VideoEncoders folder back in WinSCP.

    11. Quit WinSCP [F10]

    12. Open your iPhone and you can once again access camera and pictures.
    --------------------------------------------------------------------------

    [Many thanks to crus1971 for the camera files]
    THANK YOU SO MUCH!!!!! this helped so much, and it was my first time ever opensshing, hahaha
    2009-10-08 07:26 PM
  16. Silvercelica18's Avatar
    Where in SSh and you dragging and dropping these files under what category
    2009-10-08 07:45 PM
  17. adp's Avatar
    Thanks for the fix. My youtube works but only music and no video. Anyone having the same issue?
    My youtube app was not working (similar to yours) - it was playing music but it showed a gray QuickTime icon. If you follow the tutorial on pg2 correctly, it should fix the problem. Make sure you reboot your phone too.
    If I helped you out, please use the Thanks button ------------------------->
    2009-10-08 07:50 PM
  18. Metroplex's Avatar
    So this mod is a bust or only works for 3.1 fw?
    2009-10-08 08:20 PM
  19. Flamana's Avatar
    All good here after replacing files. THANK YOU crus1971 and Morich_222!!!
    2009-10-08 08:30 PM
  20. donniebonds's Avatar
    Instructions - Fixing Caused Problems From iPhone 3G Camera Focus Tweak on Cydia.

    NOTE: - Your iPhone needs OpenSSH (Available on Cydia) installed on it.
    - This process should fix your photos and camera from not opening and was successful in fixing this problem on my iPhone 3G with OS 3.0 Firmware.
    - As MAKAVE71 said DONT DELETE BUT REPLACE FOLDERS
    --------------------------------------------------------------------------

    Camera Files
    1. Download the camera files from attachment (Thanks to crus1971).

    2. Once downloaded extract the files.

    WinSCP
    1. Get WinSCP from here.

    2. After installing, launch WinSCP.

    3. Connect to your Wi-Fi network from your iPhone.

    4. Now launch WinSCP

    5. Now under host name, type your iPhone IP address. (To find your IP address, just go to Settings -> Wi-Fi -> and click on the blue network next to the network you're connected to)

    4. Don't fill in anything else, and press login.

    5. It might say something about a cache, just read the message, and press whichever one continues with the process.

    6. Now it'll ask for a username and password. Try these two combinations. Depending on your firmware, one of them will work.

    Username: root
    Password: alpine

    Username: root
    Password: dottie

    7. You're in! Now you have full access to your iPhone on your computer using Wi-Fi.
    --------------------------------------------------------------------------

    1. In the open window, press up until you cannot go any further.

    2. Go to: System->Library.

    3. Open the camera files downloaded.

    4. Open all folders until you reach: CoreServices, PrivateFrameworks, VideoDecoders, VideoEncoders.

    5. Open CoreServices->SpringBoard.app and select all files in that folder.

    6. Open WinSCP tab, then open CoreServices->SpringBoard.app then drag and drop the files into that folder.

    7. Go Back to camera files, hit back twice then open PrivateFrameworks->Camera.Framework select the files in that folder.

    8. Back to WinSCP tab, and hit back twice and open PrivateFrameworks->Camera.Framework and drag and drop the files into that folder.

    9. Back to camera files, hit back twice and open VideoDecoders select those files and drag and drop them into the VideoDecoders folder back in WinSCP.

    10. Back to camera files, hit back and open VideoEncoders select those files and drag and drop them into the VideoEncoders folder back in WinSCP.

    11. Quit WinSCP [F10]

    12. Open your iPhone and you can once again access camera and pictures.
    --------------------------------------------------------------------------

    [Many thanks to crus1971 for the camera files]
    Since un-installing the tweak last night, I have not been able to return from the reboot...my phone reboots, stays at the apple logo, with the white spinning circle for about 5 minutes, before attempting to do another reboot. I've used WinSCP in the past, so I'm familiar with the program. My issue is when I open and try to login on WinSCP, there is a "Network error: Connection timed out." Do you think the error is caused from my phone not being fully started? Also, after a while, my phone is detected in My Computer, as well as in iTunes, and I'm able to do a sync. I am running Windows Vista, and my iphone is 3.0.1
    2009-10-08 08:36 PM
70 1234
LINK TO POST COPIED TO CLIPBOARD