1. StealthBravo's Avatar
    dont worry. you are not a registered dev. you clicked activate in quickpwn. what you need to do is:


    [ame=http://www.youtube.com/watch?v=0f1X1XVsYOI]YouTube - Edit ipod touch/iphone System Strings with iUtilities[/ame]


    The video does not show how to change firmware.

    1. Install 3.0 b2 firmware
    2. run quickpwn
    3. download Iutilite
    4. Install Iutilite
    5. Make sure your iphone is connected to your computer

    5. When it asks for IP and Password just hit the X to the window and let the program open. Do not let the update run (I had problems with this, you may not). What I did was delete the update program from the iutilite folder before it had a chance to run the update.
    6. Go to the strings tab in Iutilite
    7. Go to the area where it says change firmware from 2.1 to, and enter into the blank box: 2.1
    8. Click the OK
    9. I unplugged my iphone from my computer and plugged it back in. I tunes starts up and you should be able to activate. I had to try this a couple of times, but mine did work after the third or fourth try.

    Good luck
    2009-04-04 07:20 AM
  2. jedinight's Avatar
    wow..looks like a symlinking nub fest.lol.there should be a wiki/guide for this .i edited it about a yr ago. so i know its there.
    2009-04-04 07:30 AM
  3. stler's Avatar
    k well im redoing the jailbreak now and i tiked off activate n kept jailbreak is that okay??
    2009-04-04 07:30 AM
  4. StealthBravo's Avatar
    wow..looks like a symlinking nub fest.lol.there should be a wiki/guide for this .i edited it about a yr ago. so i know its there.
    true. i have symlinked my apps, ringtones, wallpapers, and fonts. I have a 147 mb free!

    k well im redoing the jailbreak now and i tiked off activate n kept jailbreak is that okay??
    ur good
    Last edited by StealthBravo; 2009-04-04 at 07:51 AM. Reason: Automerged Doublepost
    2009-04-04 07:36 AM
  5. swiftbmx's Avatar
    I'm still confused on how to move Applications. I consider myself pretty good with this stuff but everything discussed this far about it over my head.

    Also, after reading this entire thread twice, I still don't get how you can get the following:
    Cydia
    Icy 1.1 Update
    dpkg
    Mobilesubtrate

    I want to try and get iRealQuickSMS working so any help is appreciated!

    Thanks
    2009-04-04 07:46 AM
  6. stler's Avatar
    OMG stealth i love you dude u completetly saved my life i cant thank you enuf thank you thank you thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    2009-04-04 07:51 AM
  7. StealthBravo's Avatar
    I'm still confused on how to move Applications. I consider myself pretty good with this stuff but everything discussed this far about it over my head.

    Also, after reading this entire thread twice, I still don't get how you can get the following:
    Cydia
    Icy 1.1 Update
    dpkg
    Mobilesubtrate

    I want to try and get iRealQuickSMS working so any help is appreciated!

    Thanks
    Cydia is not working.

    You must have saurik's repo installed to get icy 1.1.

    apt.saurik.com

    Upgrade to Icy 1.1, install core utils.

    Using Winscp ssh into your phone (ip address)

    username: root
    password: alpine

    control t to open a terminal

    Move /Applications to /private/var/stash/Applications by doing this:

    mkdir /private/var/stash
    mkdir /private/var/stash/Applications
    cp -Rv /Applications/* /private/var/stash/Applications/
    mv /Applications /Applications.bak
    ln -s /private/var/stash/Applications /Applications
    chmod -R 6755 /private/var/stash/Applications/Icy.app/Icy

    SSH back in and delete /Applications.bak

    Done and Done!

    OMG stealth i love you dude u completetly saved my life i cant thank you enuf thank you thank you thank you!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    Your welcome. Now go change your underwear.
    Last edited by StealthBravo; 2009-04-04 at 07:54 AM. Reason: Automerged Doublepost
    2009-04-04 07:54 AM
  8. lenny_xenicus's Avatar
    Another working one to add to the list - Toggle SSH
    2009-04-04 08:02 AM
  9. StealthBravo's Avatar
    Another working one to add to the list - Toggle SSH
    thanks man i updated it

    The app does run, and actually does connect to my sip server. It just crashes when I try to actually make a call. I'm guessing there is an API change that is causing it problems.
    BTW I just noticed that Siphon is in icy under utilities.
    Last edited by StealthBravo; 2009-04-04 at 08:19 AM. Reason: Automerged Doublepost
    2009-04-04 08:19 AM
  10. captjap's Avatar
    I was able to get MMS working on my IPHONE 3.0 b2. Here is what I did:

    You will need the attached IPCC file to get this working.
    Just go into ITUNES with your Iphone plugged in and hold down SHIFT and click update and select the IPCC file. Then follow the steps below.

    You will also need a spare phone. Maybe possible without one.

    You may have to try calling back a couple of times. This took me about 4 tries.


    I called AT&T and told them to add a non iphone text messaging plan to my line because I often switch between an IPHONE and a Treo.

    Once they did this. I then told them that I would like to test out MMS on my Treo to make sure I could receive mms messaging . I did not say I was trying to receive MMS on my IPhone, just on my Treo.

    I tried a test on my Treo but couldn't receive MMS. I told the AT&T rep this and he said he was going to check something in my account. Not sure what he checked. All he told me was that he was double checking to make sure there was a non IPhone text messaging plan on my account.

    After he did this I tried another test on my treo and it worked.

    I took the sim out of my treo and put into my iphone and I was able to receive MMS!!!

    I hope this helps people.
    Attached Files
    2009-04-04 08:33 AM
  11. swiftbmx's Avatar
    Cydia is not working.

    You must have saurik's repo installed to get icy 1.1.

    apt.saurik.com

    Upgrade to Icy 1.1, install core utils.

    Using Winscp ssh into your phone (ip address)

    username: root
    password: alpine

    control t to open a terminal

    Move /Applications to /private/var/stash/Applications by doing this:

    mkdir /private/var/stash
    mkdir /private/var/stash/Applications
    cp -Rv /Applications/* /private/var/stash/Applications/
    mv /Applications /Applications.bak
    ln -s /private/var/stash/Applications /Applications
    chmod -R 6755 /private/var/stash/Applications/Icy.app/Icy

    SSH back in and delete /Applications.bak

    Done and Done!
    Hey Stealth, can't thank you enough for such a concise answer. I was seriously thinking no one would reply because I was asking a lot. I have added sauriks repo but I still cannot update to 1.1 Icy. Is there something special I need to do or does it ask to update on its own?
    2009-04-04 08:36 AM
  12. StealthBravo's Avatar
    Hey Stealth, can't thank you enough for such a concise answer. I was seriously thinking no one would reply because I was asking a lot. I have added sauriks repo but I still cannot update to 1.1 Icy. Is there something special I need to do or does it ask to update on its own?
    did you install core utilities?

    I was able to get MMS working on my IPHONE 3.0 b2. Here is what I did:

    You will need the attached IPCC file to get this working.
    Just go into ITUNES with your Iphone plugged in and hold down SHIFT and click update and select the IPCC file. Then follow the steps below.

    You will also need a spare phone. Maybe possible without one.

    You may have to try calling back a couple of times. This took me about 4 tries.


    I called AT&T and told them to add a non iphone text messaging plan to my line because I often switch between an IPHONE and a Treo.

    Once they did this. I then told them that I would like to test out MMS on my Treo to make sure I could receive mms messaging . I did not say I was trying to receive MMS on my IPhone, just on my Treo.

    I tried a test on my Treo but couldn't receive MMS. I told the AT&T rep this and he said he was going to check something in my account. Not sure what he checked. All he told me was that he was double checking to make sure there was a non IPhone text messaging plan on my account.

    After he did this I tried another test on my treo and it worked.

    I took the sim out of my treo and put into my iphone and I was able to receive MMS!!!

    I hope this helps people.
    This is almost word for word of what i did. been working great for the past few days.
    Last edited by StealthBravo; 2009-04-04 at 08:42 AM. Reason: Automerged Doublepost
    2009-04-04 08:42 AM
  13. swiftbmx's Avatar
    did you install core utilities?
    Indeed I did. 6.9.5 version I believe. Tried Bossprefs as well. It pops up and vanishes before it loads. Also, iRealQuickSMS uses mobilesubstrate, anyone know if this is compatible with 3.0 yet??
    2009-04-04 08:45 AM
  14. StealthBravo's Avatar
    yea bossprefs doesnt work. mobilesubstrate is working so you could try irealquicksms. try resetting your phone then installing 1.1. what does it say when you try to install it?

    I am signing off for the night. Good luck guys! See you in 5 hours
    Last edited by StealthBravo; 2009-04-04 at 08:57 AM. Reason: Automerged Doublepost
    2009-04-04 08:57 AM
  15. Timovil's Avatar
    Hi,

    first thanks a lot to all the infos. I read now really a lot in the internet and used the search function.
    Can anybody confirm that i wont have a problem with an from fabric already unlocked iphone?
    Please i would like to try eswell but dont wanna risk something.

    Thanks a lot greetings Timo

    Sorry, was searching too bad, found a post throu google.

    Here i found a post from at004, where he tells everything is alright.
    http://www.modmyi.com/forums/unlocki...ml#post3751921

    But here i can see he uses a turbosim????
    http://www.modmyi.com/forums/unlocki...-turbosim.html

    Please at004 or somebody else can tell me if the upgrade is alright with an factory unlocked iphone or not, because i have read from some users they had problems (perhaps only a user problem).

    Greetings Timo
    Last edited by Timovil; 2009-04-04 at 12:22 PM. Reason: Automerged Doublepost
    2009-04-04 12:22 PM
  16. captjap's Avatar
    Stealthbravo do you have family unlimited text plan?
    2009-04-04 03:21 PM
  17. StealthBravo's Avatar
    Yes i do
    2009-04-04 03:30 PM
  18. cairodustu's Avatar
    Hi Guys i Jailbroke my 3.0 beta 2 and all is working fine please find my guide below

    Restore from Itunes using the new firmware (you have to be registered as a DEv for activation ,,,,,recommended)

    Run quickpwn and follow instructions (uncheck the activation box, its very imporatant or you will not get a Carrier signal)

    Run Icy , then add all sources and then hit the refresh button (incase it does not show any app close icy open again and refresh all sources(

    Once all the apps show up search and intsall in the following order

    OpenSSH (SSL will also be installed)
    Update to Icy 1.1
    Core Utils
    Mobile Substrate
    Cydia (will not work but is required for bosstool to fuction)
    Boss tools

    After installation u will get a message saying low disk space....install of using SSH to manually change the applicaton and ringtones folder just start bosstools and it will do the needfull (it wrks as long as u install all what i Have listed)

    tada....its now ready to be used as required.....


    PLEASE NOTE DO NOT INSTALL WINTERBOARD AS IT DOES NOT WORK AND IT CAUSES YOU IPHONE TO BE STUCK IN A BOOT LOOP.....


    enjoy will keep u posted on any new upadtes

    PS: All Sauriks app will not work on this and secodnly a MI patch is expected soon ....
    2009-04-04 04:05 PM
  19. drivesoslow's Avatar
    For those who want to SSH in to their phone and have a shell you can do this from a linux, OSX or cygwin BASH terminal:

    Code:
    ssh [email protected] -i
    This gives you an interactive console using your local BASH
    2009-04-04 04:32 PM
  20. peteo's Avatar
    Indeed I did. 6.9.5 version I believe. Tried Bossprefs as well. It pops up and vanishes before it loads. Also, iRealQuickSMS uses mobilesubstrate, anyone know if this is compatible with 3.0 yet??
    Try installing cydia, then install icy 1.1 that worked for me
    2009-04-04 04:41 PM
9,277 ... 1119202122233171121 ...
LINK TO POST COPIED TO CLIPBOARD