1. Cody Overcash's Avatar
    Sorry windows guys I can only make osx guides


    have fun
    2007-10-12 10:02 AM
  2. ReVan's Avatar
    Windows guide here
    Last edited by ReVan; 2007-10-12 at 01:08 PM.
    2007-10-12 10:17 AM
  3. catmando's Avatar
    make sure the program is good i had to get mine from here
    Download ieraser2 from http://www.fink.org/ieraser/ or from Geohot's blog.
    2007-10-20 11:42 AM
  4. 360boi's Avatar
    can this be used to make a 1.02 unlocked iphone (using the easy unlock method on this website) a virgin iphone so i can upgrade to 1.11 and jailbreak/ssh to?

    if so what steps could i start with? or should i just upgrade to 1.11, brick it and do everything u showed here?
    2007-10-22 01:14 AM
  5. Fresh's Avatar
    There is a much more simple method to virginize, even without using a computer.
    Enter http://i.unlock.no to the sources in installer and depending on the modem firmware version pick "The Virginizer 3x" or "The Virginizer 4x".

    You would use the 3x version in case you are running 1.0.2 and have never updated to a higher firmware version.

    Use the 4x version if you used to have an unlocked 1.0.2 and have updated to 1.1.1.

    In case you have updated from 1.0.2 to 1.1.2 you need to downgrade the baseband first with "BB downgrader", also available in installer with the mentioned source.

    2007-11-24 01:31 PM
  6. lilmike09's Avatar
    was looking for that, thanks!
    2007-11-24 05:02 PM
  7. jsupetran's Avatar
    can I use the iunlock in order if i tried to upgrade to 1.0.2 to 1.1.2 unsuccessfully?
    2007-11-24 06:34 PM