1. MamaJaay's Avatar
    Strange .. I can not get forecast to appear. I've tried Change Click = true; also.
    I normally use Topaz LS and it has never been a problem with this before. I do not use lock info either.
    Tap close to the middle of the screen
    2013-05-15 09:30 PM
  2. Destan's Avatar
    Tap close to the middle of the screen
    Tried all over the screen now, it does not appear .. (i4)
    Switched back to Topaz and tried Tap function and it works fine there
    Last edited by Destan; 2013-05-15 at 09:42 PM.
    2013-05-15 09:37 PM
  3. Dacal's Avatar
    Tried all over the screen now, it does not appear .. (i4)
    Switched back to Topaz and tried Tap function and it works fine there
    My fault, i forget to remove 'opacity: 0.0' line in the touchforecast section for the i4. Just do it. I will upload the pkg again.

    #TouchForecast {
    position: absolute;
    width: 320px;
    height: 480px;
    top: 0px;
    left: 0px;
    z-index: 70;
    -webkit-transition: all 0.3s ease-in;
    }


    My themes : Jade HD, Silex HD, BaSalt HD,ToPaz
    All are on Cydia and/or Theme It.
    2013-05-15 09:44 PM
  4. NewD's Avatar
    It actually has nothing to do with the (). It's the way the zip was packaged. If you put all contents into a folder and then ZIP the folder, when it's extracted, it puts everything back in said folder....

    However, if you select all the folders and files and then zip them (without putting them in a folder first) it scatters them when unzipped...
    Ah.. Thank you. Then, by all means, my dear fellow modding community, always put all theme elements in a surrounding folder - as modders have almost exclusively done since the beginning of modding.
    and easiest way is move the whole widget -20px, and then simply move the city and desc entries in the css +20px
    Then the Desc will run into the top of the clock. So I guess the answer is "no" - no easy way to do this.. All elements of clock have to be moved down if I move whole widget up. Maybe I can create a container around all clock elements. I asked this of Ian last time - why he'd build UniAW for a Lockscreen with the same 20px drop as a PerPageHTML doc page. Oh well.. Onward!
    Thx!
    2013-05-15 09:44 PM
  5. sethbossfan's Avatar
    Me ATM. UNIAW 6.2 SE LS using on Springboard.

    Credits to MamaJaay for the best Timed Walls and Ian and Dacal for UNIAW and all it's awesomeness!

    ImageUploadedByModMyi1368643845.293841.jpg
    IOS 7 - A KNEE JERK JAILBREAK RELEASE
    2013-05-15 09:51 PM
  6. NewD's Avatar
    My fault, i forget to remove 'opacity: 0.0' line in the touchforecast section for the i4. Just do it. I will upload the pkg again.

    #TouchForecast {
    position: absolute;
    width: 320px;
    height: 480px;
    top: 0px;
    left: 0px;
    z-index: 70;
    -webkit-transition: all 0.3s ease-in;
    }
    so all is fine in the 5?
    Last edited by NewD; 2013-05-15 at 09:55 PM.
    2013-05-15 09:52 PM
  7. King_O_Hill's Avatar
    @Grant

    That's why when viewing the zip file just before pressing the extract button, I always take a quick look to make sure that it is going into a folder. This also tells me the folder name, as sometimes it is different from the zip file name.

    Just old school habit.

    There is no opacity:0.0 line there in your code or in the widget either Dacal. So I don't quite follow you.
    Are you looking in the iPhone 4 version? I thought you were using an iPhone 5?!?!

    Check out WW3 for iOS 9/10 - Widget-Weather 3.0
    2013-05-15 09:52 PM
  8. MamaJaay's Avatar
    Ah.. Thank you. Then, by all means, my dear fellow modding community, always put all theme elements in a surrounding folder - as modders have almost exclusively done since the beginning of modding.
    Then the Desc will run into the top of the clock. So I guess the answer is "no" - no easy way to do this.. All elements of clock have to be moved down if I move whole widget up. Maybe I can create a container around all clock elements. I asked this of Ian last time - why he'd build UniAW for a Lockscreen with the same 20px drop as a PerPageHTML doc page. Oh well.. Onward!
    Thx!
    Hey grant? Most people simply use Uniaw as a base code for mods, and move stuff all over the place to fit into various overlays. Believe it or not, I could show you mods that started as uniaw but look NOTHING like it any longer. That's the power of CSS.
    2013-05-15 09:57 PM
  9. Dacal's Avatar
    so all is fine in the 5?
    Yes . Pkg is now up to date.


    My themes : Jade HD, Silex HD, BaSalt HD,ToPaz
    All are on Cydia and/or Theme It.
    2013-05-15 09:57 PM
  10. NewD's Avatar
    @Grant

    That's why when viewing the zip file just before pressing the extract button, I always take a quick look to make sure that it is going into a folder. This also tells me the folder name, as sometimes it is different from the zip file name.

    Just old school habit.
    Hmm. Ok.. Thanks!
    Are you looking in the iPhone 4 version? I thought you were using an iPhone 5?!?!
    My error. I was looking in the CSS for the 5. Edited my post.
    2013-05-15 09:59 PM
  11. MamaJaay's Avatar
    Me ATM. UNIAW 6.2 SE LS using on Springboard.

    Credits to MamaJaay for the best Timed Walls and Ian and Dacal for UNIAW and all it's awesomeness!

    ImageUploadedByModMyi1368643845.293841.jpg
    Seth, have you removed the touch function from the code before applying as a SB? I wonder because although you can't activate it, it will still be there and eat RAM, I think I will modify this version that Dacal has graciously posted for us into SmashExtreme v5 with matching lock and SB. I have ideas
    2013-05-15 10:02 PM
  12. NewD's Avatar
    Hey grant? Most people simply use Uniaw as a base code for mods, and move stuff all over the place to fit into various overlays. Believe it or not, I could show you mods that started as uniaw but look NOTHING like it any longer. That's the power of CSS.
    Of course you're right, MJ.. But Ian's Lockscreen is the only lockscreen I've ever owned that already starts 20 pixels too low on the screen itself - has in the Body Tag a top: 20px. Sure I can get rid of that 20 pixels in the body tag but then every single CSS element moves too high on the lockscreen as if the widget is still designed first and foremost for perpagehtml. That was my only point.

    But a little tinkering in the CSS is what makes us modders, right?!
    Last edited by NewD; 2013-05-15 at 10:07 PM.
    2013-05-15 10:04 PM
  13. sethbossfan's Avatar
    Seth, have you removed the touch function from the code before applying as a SB? I wonder because although you can't activate it, it will still be there and eat RAM, I think I will modify this version that Dacal has graciously posted for us into SmashExtreme v5 with matching lock and SB. I have ideas
    I made two copies. One will be used for the Lockscreen with touch function an one on my springboard.

    But no I didn't remove the touch functionality even though it does not work on my SB and that's expected. Maybe I should remove it for the reason you say (eating the RAM
    Albeit... My phone is running fine now. No lag or problems.

    Note: I also disabled birds. I have v shaped birds set to true bit it only works with both v shape and regular birds set to true as Ian mentioned and Marty discovered.

    I'd love it though if you made a Smash v5 combo. It would be even better!
    Last edited by sethbossfan; 2013-05-15 at 10:38 PM.
    IOS 7 - A KNEE JERK JAILBREAK RELEASE
    2013-05-15 10:08 PM
  14. Destan's Avatar
    Yes . Pkg is now up to date.
    Thank you dacal Everything works now!
    2013-05-15 10:09 PM
  15. Dacal's Avatar
    I have planned to change some little things for myself, move the elements up to 20px and changed a little some code.

    Not the time now, i will update the link at the end of the week.


    My themes : Jade HD, Silex HD, BaSalt HD,ToPaz
    All are on Cydia and/or Theme It.
    2013-05-15 11:53 PM
  16. NewD's Avatar
    I have planned to change some little things for myself, move the elements up to 20px and changed a little some code.

    Not the time now, i will update the link at the end of the week.
    Thanks, Dacal! And I keep forgetting - with each new update for WB and LS that UniAW has to be reset in the Body command in the css from top: 20px to top: 0px. 20px is there because of PerPageHTML. All the balloons fly kinda low on WB and LS versions unless you reset body to 0px. With each new version I keep forgetting that.
    2013-05-16 12:22 AM
  17. Dacal's Avatar
    Thanks, Dacal! And I keep forgetting - with each new update for WB and LS that UniAW has to be reset in the Body command in the css from top: 20px to top: 0px. 20px is there because of PerPageHTML. All the balloons fly kinda low on WB and LS versions unless you reset body to 0px. With each new version I keep forgetting that.
    I have updated the LS. I have completely adjusted the CSS for both iph5 & 4, adjust the fade time to 3 second (more quick) and change a little the code for the touch function (+ minor things i don't remember...).

    Same link as before.


    My themes : Jade HD, Silex HD, BaSalt HD,ToPaz
    All are on Cydia and/or Theme It.
    2013-05-16 02:39 AM
  18. MamaJaay's Avatar
    2013-05-16 03:08 AM
  19. Dacal's Avatar
    Thank you dacal
    Advice to download it again, i have corrected an issue in case of you touch the screen too quickly after lock your phone . Black screen.

    Now, it must work. Not so easy to anticipate all things user can do .


    My themes : Jade HD, Silex HD, BaSalt HD,ToPaz
    All are on Cydia and/or Theme It.
    2013-05-16 03:46 AM
  20. NewD's Avatar
    I have updated the LS. I have completely adjusted the CSS for both iph5 & 4, adjust the fade time to 3 second (more quick) and change a little the code for the touch function (+ minor things i don't remember...).

    Same link as before.
    Looks fantastic Dacal (and MJ!!)! What a wonderful blending of these two worlds on my My Lockscreen. I actually had nearly this exact same set up running on my SB before you came out with this - since I have MJ's 30 min walls as a standalone - which I run below UniAW6.2_WB in WB. Gets me the same thing - except no Clock or Weather info for SB. I prefer all the weather info stuff on my LS and not my SB. Just personal taste...

    Thanks for all your work. For my first year here - I rarely ever saw you and Ian except in the credits lines of weather widgets.. I'm glad I got to know you guys through this massive collaboration on UniAW6!!!

    Appreciate your talents!
    2013-05-16 06:29 AM
1,416 ... 22303132333442 ...
LINK TO POST COPIED TO CLIPBOARD