1. jm26200's Avatar
    Thank you to everyone especially to Ian, Marty, NewD and Chevy sorry not nomed all
    For this work in the immediacy deep respect for your selflessness and always respond in an emergency
    Thank you for all this great work you do
    Best regards

    ----

    like it Sital and Ian mdr

    Quote Originally Posted by <Ian Nicoll/> View Post
    It's to get something rather than "TBD"
    Sital said ---> display:none;
    Mouahahahahhaha ...
    and answer Ian so good

    LOL... I said "to get something" not nothing.


    I like these very subtle spread in a tone that shows the harmony and serenity of this theme

    Thx again at alll
    2016-01-24 06:08 AM
  2. <Ian Nicoll/>'s Avatar
    i did use the new Yahoo fix..didn't work

    will go check line by line

    weird..
    If your widget is NOT for Groovy+, post a link here so I, Marty or ND can look at it.
    2016-01-24 07:02 AM
  3. Splatty79's Avatar
    Splatty, if you use the new code on post #9018 it'll change to city automatically when no neighborhood is available. Then you can just leave the switch in Config file (or iWidget options) set to neighborhood.
    I had the code in and that didn't work? Marty put it in that widget as well for me and didn't show anything?
    2016-01-24 08:10 AM
  4. <Ian Nicoll/>'s Avatar
    I had the code in and that didn't work? Marty put it in that widget as well for me and didn't show anything?
    It's been updated since Marty put it in.
    2016-01-24 08:12 AM
  5. Matthews436's Avatar
    A couple of questions:

    Is this code purely for uniaw widgets/LS or can it be injected in to all widgets?

    And

    What programme are you using on Windows to open the code?

    I tried wordpad but the code copied as one massive paragraph :-(
    2016-01-24 08:27 AM
  6. <Ian Nicoll/>'s Avatar
    I had the code in and that didn't work? Marty put it in that widget as well for me and didn't show anything?
    Here is a link your widget with new updated code from post #9018. You can now leave the switch in Config.js at "neighborhood", if there is no neighborhood for a certain area it will automatically use city, when there is a neighborhood it will use it.

    https://www.dropbox.com/s/4hjpcze8cm...latty.zip?dl=0
    2016-01-24 08:49 AM
  7. nik1975's Avatar
    @Ian @Marty @Newd and all the rest of the people here in modmyi who help us a BIG THANK YOU!!!
    My widgets works again using the yahoo new feed
    UniAW7-imageuploadedbymodmyi1453621752.165527.jpgUniAW7-imageuploadedbymodmyi1453621772.600274.jpg
    A question,the additional addresses through ww2 menu are not working for now,am i right?
    I want a last favour,i cant make this work,i see that there is not the address .
    If you like can you please fix it??
    Thanks again
    https://www.dropbox.com/s/yesetzxi5n...lecar.zip?dl=0
    2016-01-24 08:53 AM
  8. jm26200's Avatar
    A couple of questions:

    Is this code purely for uniaw widgets/LS or can it be injected in to all widgets?

    And

    What programme are you using on Windows to open the code?

    I tried wordpad but the code copied as one massive paragraph :-(
    try notes++ for windows

    link here https://notepad-plus-plus.org/download/v6.8.8.html

    eg :
    UniAW7-note-.jpg
    2016-01-24 08:56 AM
  9. <Ian Nicoll/>'s Avatar
    @Ian @Marty @Newd and all the rest of the people here in modmyi who help us a BIG THANK YOU!!!
    My widgets works again using the yahoo new feed
    UniAW7-imageuploadedbymodmyi1453621752.165527.jpgUniAW7-imageuploadedbymodmyi1453621772.600274.jpg
    A question,the additional addresses through ww2 menu are not working for now,am i right?
    I want a last favour,i cant make this work,i see that there is not the address .
    If you like can you please fix it??
    Thanks again
    https://www.dropbox.com/s/yesetzxi5n...lecar.zip?dl=0
    Nor really sure what you mean.
    Do you mean "Additional Locations"? If so I believe they should work but without city name, I "think" for additional locations there is only info from .xml files, i.e not multiple "myLocation.txt" files, & since we are now using the "myLocation.txt" to get the city name you will only get one (the main one) with a city name.

    I never use Additional Locations so I might be wrong.
    2016-01-24 09:26 AM
  10. Splatty79's Avatar
    Here is a link your widget with new updated code from post #9018. You can now leave the switch in Config.js at "neighborhood", if there is no neighborhood for a certain area it will automatically use city, when there is a neighborhood it will use it.

    https://www.dropbox.com/s/4hjpcze8cm...latty.zip?dl=0
    Thanks Ian but still blank for both city and neighborhood switch in the iwidget? No stress, I am on holidays so may be a bit weird location
    2016-01-24 09:30 AM
  11. nik1975's Avatar
    Nor really sure what you mean.
    Do you mean "Additional Locations"? If so I believe they should work but without city name, I "think" for additional locations there is only info from .xml files, i.e not multiple "myLocation.txt" files, & since we are now using the "myLocation.txt" to get the city name you will only get one (the main one) with a city name.

    I never use Additional Locations so I might be wrong.
    Yes thats right,in additional locations,shows the weather but the city stays the same name.
    Also if you have time,check if you want the ls widget that i post that hasnt got in css address to duplicate!
    I dont know from where showing in the past the address and city
    2016-01-24 09:46 AM
  12. <Ian Nicoll/>'s Avatar
    Yes thats right,in additional locations,shows the weather but the city stays the same name.
    Also if you have time,check if you want the ls widget that i post that hasnt got in css address to duplicate!
    I dont know from where showing in the past the address and city
    I can do nothing about the city name in Extra Locations, for this you must wait till KOH posts an update for WW2.

    As for the city name (without Extra Locations on) please download & unzip the attached file, place the 4 files into your widget in the correct places replacing the old ones.

    The code is a little different for this widget.

    I don't know where the address is supposed to go so I just stuck it at the top.

    NOTE: These files will ONLY work with WW2.0_Base_UniAW7_chevymusclecar, which doesn't have the UniAW clock as in your screen shot above??
    Attached Files
    Last edited by <Ian Nicoll/>; 2016-01-24 at 10:44 AM.
    2016-01-24 10:40 AM
  13. <Ian Nicoll/>'s Avatar
    Thanks Ian but still blank for both city and neighborhood switch in the iwidget? No stress, I am on holidays so may be a bit weird location
    I'm just curious pal, what is your coordinates in your current location, I'de like to check.
    2016-01-24 10:42 AM
  14. nik1975's Avatar
    I can do nothing about the city name in Extra Locations, for this you must wait till KOH posts an update for WW2.

    As for the city name (without Extra Locations on) please download & unzip the attached file, place the 4 files into your widget in the correct places replacing the old ones.

    The code is a little different for this widget.

    I don't know where the address is supposed to go so I just stuck it at the top.

    NOTE: These files will ONLY work with WW2.0_Base_UniAW7_chevymusclecar, which doesn't have the UniAW clock as in your screen shot above??
    Thanks man I ll try!!
    2016-01-24 11:07 AM
  15. Splatty79's Avatar
    I'm just curious pal, what is your coordinates in your current location, I'de like to check.
    Lat=-38.450085
    Long=145.249833
    2016-01-24 11:12 AM
  16. nik1975's Avatar
    @Ian this is what i getUniAW7-imageuploadedbymodmyi1453631714.808034.jpg
    2016-01-24 11:35 AM
  17. <Ian Nicoll/>'s Avatar
    @Ian this is what i getUniAW7-imageuploadedbymodmyi1453631714.808034.jpg
    Oops, my bad, in Config.js set this:
    var XML_TEST = false;
    var ChangeClick = false;
    Last edited by <Ian Nicoll/>; 2016-01-24 at 12:33 PM.
    2016-01-24 12:06 PM
  18. <Ian Nicoll/>'s Avatar
    Lat=-38.450085
    Long=145.249833
    Sorry pal, I'm stupid today, try this one:

    https://www.dropbox.com/s/2p245iwnxx...atty2.zip?dl=0
    Last edited by <Ian Nicoll/>; 2016-01-24 at 12:35 PM.
    2016-01-24 12:29 PM
  19. shamjosh's Avatar
    Hi all
    Just asking
    Will this "fix" will not work on widgets that use
    GB+
    GL+ ??
    Thanks
    2016-01-24 12:41 PM
  20. Splatty79's Avatar
    Sorry pal, I'm stupid today, try this one:

    https://www.dropbox.com/s/2p245iwnxx...atty2.zip?dl=0
    Thanks buddy that works great. I will use as the base for my others. Cheers for all your help mate
    2016-01-24 12:42 PM
LINK TO POST COPIED TO CLIPBOARD