User Tag List

  1. crazi3flip's Avatar
    Hey guys, first post! Haha, but yeah, I've got a problem on my hands that's quite frustrating. I'll let the video explain my problem, but if you can't watch it right away, here is the gist:

    -replaced digitizer + lcd (it works, didn't break any cables, i can hear out of earpiece, headphones, nothings wrong)
    -iPhone won't work with direct sunlight hitting the sensors
    -iPhone LCD won't turn off when close to face while on the phone (but if i cover the sensors, it won't allow me to "click" anything, i.e. i could be tapping on mute, but it won't register unless my hand is off the sensors)

    and, here is the video!

    EDIT: New discovery!

    -Phantom keyboard presses when i put pressure on the sensor area

    Please help! I'm one of the few people that actually speak literately on forums asking for help, AND I got videos to help explain my problem! =P

    bump for great justice!
    Last edited by crazi3flip; 2009-07-13 at 01:03 PM. Reason: Automerged Doublepost
    2009-07-13 01:03 PM
  2. one1's Avatar
    Well it doesn't take much to figure your sensors are screwing this up. So......... take it back apart and do it again.
    Iíve been here almost 12 years, 10k posts, 1100 thanks. I donít need post approval.
    2009-07-13 06:20 PM
  3. crazi3flip's Avatar
    I pretty much figured that... but i've opened up and reattached the cable maybe 9 times now, even to the point of prying the digitizer/glass off the top to make sure the sensors weren't covered. And as I said, the earpiece works, i've used the phone to call people until my face keeps touching the end call button to the point i use speaker or a pair of headphones to be able to lock the screen.

    My current guess is that when i had to use a heat gun to free up the glue between the OEM glass and midboard, i might've screwed up the sensors.

    Does it sound safe to say that i need to get a new sensor flex cable? And, if I were to get a new one off of ebay, how do I install that?
    2009-07-13 06:32 PM
  4. cpjr's Avatar
    Yeah you probably toasted it when you cooked it with a heat gun.

    You can pop #3 cable off in about 3 seconds with a small flathead screwdriver.
    2009-07-14 01:17 AM
  5. crazi3flip's Avatar
    so cable 3 is just a quick pop out, pop in, no soldering necessary? is the headphone piece just need to have contact on the cable?
    2009-07-14 02:01 AM
  6. cpjr's Avatar
    2009-07-14 02:06 AM
  7. crazi3flip's Avatar
    Thanks, I'm going to order the prox. cable, and ill post my results.
    2009-07-14 03:04 AM
  8. crazi3flip's Avatar
    ok, im doing the repair, but im in a bind.

    how the hell do i get the metal piece off?!

    ok, so i've replaced the prox/light flex, proximity works, where i can't touch anything, but it still wont shut the screen off and my phone still locks up in daylight/bright light.

    what could be the problem?


    It was what I suspected.

    The aftermarket digitizer's black was TOO black near the sensors.

    Pry'd the glass forward, stuck a screwdriver in there and began to scratch the glass to reveal the sensors.

    works like a charm now.
    Last edited by crazi3flip; 2009-07-17 at 09:43 PM. Reason: Automerged Doublepost
    2009-07-17 09:43 PM
  9. rdiel's Avatar
    Hi Crazi3flip,

    Please ... how to remove the "metal" piece ?
    I am having the same problem and trying to replace the cable #3.

    Hope to hear from you soon.

    THank you.

    2009-07-19 01:37 PM
  10. crazi3flip's Avatar
    you're going to have to man handle that piece off. it's going to feel like you're going to break it, but keep prying at it, from the right side (the side that has the screw) and work your way towards the ear piece.
    2009-07-20 02:11 AM
  11. tiguy99's Avatar
    Glad you got it working bro! I just put a mirror screen protector on my phone last night and although it kinda looks cool, my proximity sensors aren't working right anymore.

    I was contemplating removing the mirror face altogether or just slicing the area where the proximity sensors are when I found your thread lol

    Keep up the good work
    2009-07-21 02:09 PM
  12. crazi3flip's Avatar
    Appreciate it man.

    Yeah, I should've just scratched the glass from the beginning but i wanted to go for a clean glass, but whatever, it made it work. hahaha
    2009-07-21 06:37 PM
  13. nacken2008's Avatar
    i solved the problem simpler

    the glass is not really darker black than the original

    i just took the old sensor from my original front, this is an original apple sensor which is working without problems

    i think the sensors which come with the cheap front panels have not that quality in working like the original ones

    No Homo!
    2012-08-06 12:19 PM
  14. iRevival's Avatar
    It probably shipped with a bad sensor then. Glad you got it working.
    Twitter: @irevivalrepairs | Instagram: @irevivalrepairs

    iPhone 4/4S Frame Swappers:
    Don't forget about that sim tray lever!
    iPhone 5 Frame Swappers:
    Don't forget about those screen clips!
    2012-08-06 07:02 PM

Tags for this Thread