User Tag List

  1. jstchillin.365's Avatar
    THIS WILL ONLY WORK WITH 3G/3GS NOT FOR 2G!!



    1. disassemble your screen by unscrewing all screws on screen assembly. split the digitizer and LCD.Check out youtube tutorials for detailed disassembly.

    2. Stick a mailing tape or scotch tape where you see dust. (I prefer mailing tape because you can get larger area than regular scotch tape. NEVER USE DUCK TAPE! you will get icky residue on the LCD screen if duck tape is used.

    3. Remove the tape gently when removing it from the LCD.

    4. Repeat 2 and 3 as many time till you get a perfect screen.

    5. Reassemble!

    This technique is by far the best way! Better than air duster since the particles are stuck on the LCD.

    Hope this helps!
    Last edited by jstchillin.365; 2010-03-18 at 03:18 PM.
    2010-03-18 02:17 PM
  2. Cid6.7's Avatar
    This sounds like a pretty good idea but I would use masking tape like painters use if I were to try this method..But I think I'll stick with good ole aircan..
    2010-03-18 03:15 PM
LINK TO POST COPIED TO CLIPBOARD