User Tag List

  1. Flathed's Avatar
    I have a 3G with a broken screen and LCD, if I put a 3GS digitizer and LCD into the midframe, would everything work properly (on a 3GS phone of course)?
    2011-02-19 09:17 PM
  2. Cowboy's Avatar
    yup your good
    2011-02-20 12:35 AM
  3. Vitiell0's Avatar
    NO! The LCD and DIgi are not compatible. The actual midframe, number 3 cable, and home button are but you CAN NOT put a digi/glass and LCD from a 3GS onto a 3G
    2011-02-20 06:19 PM
  4. Cowboy's Avatar
    Re read he took his LCD and digi from his 3GS but it on a 3G midframe yes it will work
    2011-02-20 07:02 PM
  5. Flathed's Avatar
    It did work, thank you Westerman.
    2011-02-22 08:22 AM
  6. Cowboy's Avatar
    No problem
    2011-02-22 11:03 AM
  7. Flathed's Avatar
    One issue though, I'm not sure if the cheap replacement digitizer's home button whole was too small, but the button was sticky after installation, swapped it out with a 3gs button, same problem. I think I fixed it externally, I took my spare button and inverted it over the installed button and pushed down a few times hoping the installed button would line up, it did. Not sure if it was the digitizer or the frames problem, or something else.
    2011-02-22 05:21 PM
  8. Cowboy's Avatar
    I am thinking digi where did you get it from
    2011-02-22 08:45 PM