1. pyromaniaque's Avatar
    Was checking the #5 connector to see if it was disconnected because my lock button and volume rockers don't work.

    Wasn't the problem, so I plugged in the device to the charge cable to boot the device.

    I hadn't closed the phone casing so I would have quick access to the connectors.

    Anyway, the screen is working fine but then I move the front panel display of the iPhone assembly and then BOOOM! White.

    -I have checked and reconnected the display connectors and can confirm they are properly seated.

    Do you think that a reset, restore, DFU or whatever it's called would do the trick?

    ...Although, maybe I'm between a rock and a hard place because how can I do this without a functioning lock button?
    Last edited by pyromaniaque; 2012-08-17 at 10:33 AM.
    2012-08-17 10:19 AM
  2. pashke84's Avatar
    I think you should try taking it apart a little more, and get the main board off of the battery contacts for a few seconds and then reassemble it... that helped me a few times
    2012-08-18 07:52 AM