1. King_O_Hill's Avatar
    Nothing new installed today..

    at approximately 7pm EST my phone decided that it would no longer pick up cell service. Only wifi. And what good is a phone if you can't make calls....

    Reboot, reset all, reset network, hard reset, ilex rat, nothing.

    Restore only option. Cell service back up and running.

    On the plus side, I'm sure my battery will last longer... Not from the lack of tweaks, but from checking the threads a lot less often...
    Sell it and buy another.

    Check out WW3 for iOS 9/10 - Widget-Weather 3.0
    2013-05-30 03:18 AM
  2. The_Durben's Avatar
    Loving the new reload button. Make changes on the fly and simply reload instead of having to respring everytime.
    Overlays for you dude.
    Think I made 5
    See if you like https://www.dropbox.com/s/jfns6swwyy...onOverlays.zip

    @Drift

    Was trying to wrap my head around what code goes where for this idea if it can even work but take the script functions for the touch part of the weather config and add them into an iWidget (not as options but an iWidget with full touchable area. Direct the iWidget of the main one running the weather info and animations to the iWidget with the touch options in it and vice versa.
    Because the iWidget plist remains in cache even after you close it it could possibly be used as a "set up iWidget" that you add to SB to set your main widget and then close it.
    Main widget can then run a 320x20 plist height and you can use icons on the whole page.
    So basically make two iWidgets to run as one when needed.
    The cookies in the widget should take care of the rest.
    Not even sure it's possible but maybe worth a shot
    Last edited by The_Durben; 2013-05-30 at 03:33 AM.
    2013-05-30 03:25 AM
  3. Marty McFly's Avatar
    Having some fun with the Accuweather forecast:

    UniAW6.0 for iph4 & iph5-new-1.png

    Thanks to Ian and Dacal for 6.3!
    2013-05-30 03:39 AM
  4. bliken's Avatar
    That looks cool


    Having some fun with the Accuweather forecast:

    UniAW6.0 for iph4 & iph5-new-1.png

    Thanks to Ian and Dacal for 6.3!
    2013-05-30 03:54 AM
  5. NewD's Avatar
    Having some fun with the Accuweather forecast:

    UniAW6.0 for iph4 & iph5-new-1.png

    Thanks to Ian and Dacal for 6.3!
    Marty, you're a true "renaissance man"!!
    2013-05-30 03:57 AM
  6. Marty McFly's Avatar
    Nothing new installed today..

    at approximately 7pm EST my phone decided that it would no longer pick up cell service. Only wifi. And what good is a phone if you can't make calls....

    Reboot, reset all, reset network, hard reset, ilex rat, nothing.

    Restore only option. Cell service back up and running.

    On the plus side, I'm sure my battery will last longer... Not from the lack of tweaks, but from checking the threads a lot less often...
    Oh MJ, I'm so sorry!!!!
    2013-05-30 04:00 AM
  7. bliken's Avatar
    Hey guys since I am using 6.3 LS on my SB is there a way to make the flower go away? Since it doesn't do anything on the SB.

    ImageUploadedByModMyi1369879350.298252.jpg
    2013-05-30 04:02 AM
  8. MamaJaay's Avatar
    Oh MJ, I'm so sorry!!!!
    It's all good. It's just a phone. I'm mad as hell though
    2013-05-30 04:02 AM
  9. jawonder's Avatar
    It's all good. It's just a phone. I'm mad as hell though
    Don't worry MamaJaay look at the good side, you can now test iOS 7 when it comes out .
    2013-05-30 04:12 AM
  10. <Ian Nicoll/>'s Avatar
    Hey guys since I am using 6.3 LS on my SB is there a way to make the flower go away? Since it doesn't do anything on the SB.

    ImageUploadedByModMyi1369879350.298252.jpg
    In your css file: Add the line in red.


    Code:
    #TouchLayer2{
    	background: url('../../Images/buttons/refresh.png') center no-repeat;
    	background-size: 100px 71px;
    	position: absolute;
    	top: 440px;
    	left: 238px;
    	width: 100px;
    	height: 71px;
    	z-index: 1001;
    	opacity: 0.0;
    	-webkit-transform: rotate(25deg); 
    	-webkit-animation: global_fadein 2s linear 1 normal;
    	-webkit-animation-fill-mode: forwards;	
    	display: none;
    }
    2013-05-30 04:21 AM
  11. RandyTG's Avatar
    Some recommendations for consideration for version 6.3.1 or 6.4;

    Being able to change all of the information text color with a single setting entry; rather than changing it for each separate variable.

    If I have the full screen fog and clouds set to true; having lightning that covers the full length of the screen as well. Big and bright.

    Thanks for the awesome upgrades that just keep getting better and better.
    2013-05-30 04:25 AM
  12. bliken's Avatar
    Great idea

    Some recommendations for consideration for version 6.3.1 or 6.4;

    Being able to change all of the information text color with a single setting entry; rather than changing it for each separate variable.

    If I have the full screen fog and clouds set to true; having lightning that covers the full length of the screen as well. Big and bright.

    Thanks for the awesome upgrades that just keep getting better and better.
    2013-05-30 04:26 AM
  13. Simon's Avatar
    Overlays for you dude.
    Think I made 5
    See if you like https://www.dropbox.com/s/jfns6swwyy...onOverlays.zip

    @Drift

    Was trying to wrap my head around what code goes where for this idea if it can even work but take the script functions for the touch part of the weather config and add them into an iWidget (not as options but an iWidget with full touchable area. Direct the iWidget of the main one running the weather info and animations to the iWidget with the touch options in it and vice versa.
    Because the iWidget plist remains in cache even after you close it it could possibly be used as a "set up iWidget" that you add to SB to set your main widget and then close it.
    Main widget can then run a 320x20 plist height and you can use icons on the whole page.
    So basically make two iWidgets to run as one when needed.
    The cookies in the widget should take care of the rest.
    Not even sure it's possible but maybe worth a shot
    Love them man, thanks. Only problem I have is picking which one I like the best lol. Love the little jellylock cutout you did for them, very nice touch

    You wouldn't be able to put that semi-transparent wood overlay on this wall would you?


    I've always loved the brushed look of this wall, together with your wood overlay I think would be perfect.
    Last edited by Simon; 2013-05-30 at 04:41 AM.
    2013-05-30 04:37 AM
  14. k1653d's Avatar
    Here is your fixed UniAW6.js file, the weather now works. I did not remove the touch function.

    WeatherAnimLS1.0_UniAW6.js
    https://www.dropbox.com/s/5c4nx9aw5b..._UniAW6.js.rar


    Weather works and disabled the touch function. I also fixed the forecast. If you want it back, go into Css/Main/UniAW6.css and change the z-index of touchlayer to 1000.

    https://www.dropbox.com/s/8xpmlerjli...herAnimLS1.zip
    Thanks!!!! You guys are awesome.
    2013-05-30 04:45 AM
  15. NewD's Avatar
    It would seem in 6.3Accuweather LS that the default unit for Barometric pressure is a 4 digit MB number instead of the 30.13 type number you normally see in US. I don't see a config.js setting for that. I am set to Fahrenheit and thought Baropressure unit would am switch automatically when using C or F in the config.js. How can we get that reading correctly?
    2013-05-30 04:48 AM
  16. <Ian Nicoll/>'s Avatar
    Some recommendations for consideration for version 6.3.1 or 6.4;

    Being able to change all of the information text color with a single setting entry; rather than changing it for each separate variable.

    If I have the full screen fog and clouds set to true; having lightning that covers the full length of the screen as well. Big and bright.

    Thanks for the awesome upgrades that just keep getting better and better.
    Thanks for the suggestions but at present really looking for any faults with this version as I now start to do my tweaks on the "CHOICE" version, your points are noted though.

    I recon the choice version will replace all versions, all Yahoo or all Accuweather in one widget.
    I got this a while back from Dacal but had a few concerns, but now he change the code and its working great. Thanks Dacal for putting up with me LOL.. but I'm glad I complained M8, because the new choice version is perfect.
    2013-05-30 04:50 AM
  17. bliken's Avatar
    Thanks for the suggestions but at present really looking for any faults with this version as I now start to do my tweaks on the "CHOICE" version, your points are noted though.

    I recon the choice version will replace all versions, all Yahoo or all Accuweather in one widget.
    I got this a while back from Dacal but had a few concerns, but now he change the code and its working great. Thanks Dacal for putting up with me LOL.. but I'm glad I complained M8, because the new choice version is perfect.
    Can't wait for the final version Ian......and hoping for a switch in the config to switch between yahoo and accuweather. I am loving 6.3 on my SB
    2013-05-30 04:57 AM
  18. Marty McFly's Avatar
    It would seem in 6.3Accuweather LS that the default unit for Barometric pressure is a 4 digit MB number instead of the 30.13 type number you normally see in US. I don't see a config.js setting for that. I am set to Fahrenheit and thought Baropressure unit would am switch automatically when using C or F in the config.js. How can we get that reading correctly?
    In UniAW6.js, change this line:

    obj.pressure = Math.round($.trim($(this).find('Pressure').text()) * 33.8638864);

    To this:

    obj.pressure = $(this).find('Pressure').text();

    EDIT: That will just get the reading correct the way you want it. Setting "c" or "f" in config won't have any impact on unit displayed. I thought the pressure always displayed in MB regardless of temp unit...no?
    Last edited by Marty McFly; 2013-05-30 at 05:10 AM.
    2013-05-30 05:01 AM
  19. NewD's Avatar
    In UniAW6.js, change this line:

    obj.pressure = Math.round($.trim($(this).find('Pressure').text()) * 33.8638864);

    To this:

    obj.pressure = $(this).find('Pressure').text();

    EDIT: That will just get the reading correct the way you want it. Setting "c" or "f" in config won't have any impact on unit displayed. I thought the pressure always displayed in MB regardless of temp unit...no?
    Nope. Barometric pressure reads in "inches" in most measurement systems in the world. All UniAW versions before this one had inches tied to F and MB tied to C.
    2013-05-30 05:27 AM
  20. The_Durben's Avatar
    Love them man, thanks. Only problem I have is picking which one I like the best lol. Love the little jellylock cutout you did for them, very nice touch

    You wouldn't be able to put that semi-transparent wood overlay on this wall would you?




    I've always loved the brushed look of this wall, together with your wood overlay I think would be perfect.
    Tomorrow no problem. Won't be back on PS tonight
    2013-05-30 05:29 AM
LINK TO POST COPIED TO CLIPBOARD