1. djmean's Avatar
    This has been only tried on MAC OSX Leopard 10.5.2 and iTunes 7.6.1 there are chances on bricking iPhone but it is on ur own risk below are the steps i used to unlock my Iphone.

    Download:
    1) http://code.google.com/p/independence/
    Independence version 1.4 beta 5

    2)Ziphone for MAC OSX from ziphone.org

    3)1.1.4 Firmware from iTunes

    Step One: Make sure u have bootloader 3.9

    Step two: Restore iPhone to version 1.1.4 using iTunes and back up if u want to i recommend u do

    Step three: After it is done run independence and click Jailbreak and then Activate there may be a dialog which says downloading firmware files. Thats ok.

    Step Four: after that is complete install ssh

    Step Five: Now after go to info and check if u have the firmware 4.02.13_G

    Step Six: Now run ziphone and click jailbreak to install installer.app

    Step Seven: Run installer and add the iclarified source if not already added which is installer.iclarified.com.

    Step Eight: Install BSD Subsystem and BSD SUbsystem term fix

    Step Nine: Exit installer and go to settings and set auto lock to never

    Step Ten: Open installer and open iclarified folder and run the UNLOCK 1.1.4. this will take five MINUTES so let it do its thing after it should come ur iphone is unlocked.

    Now u should be having an unlocked iPhone with the latest baseband which is 4.04.05_G



    Credits go to iclarified and zibri and everyone else who has been invloved in the unlocking of the iPhone

    FOR PROOF OPEN THE ATTACHMENT TO THE SEE THE LATEST VERSION AND FIRMWARE NO. AND ALSO ON THE TOP LEFT THERE IS THE CARRIER NAME WHICH IS ETISALAT WHICH IS USED IN THE MIDDLE EAST
    Attached Thumbnails One of the ways for Unlocking 1.1.4-photo-1.jpg  
    Last edited by djmean; 2008-02-28 at 11:10 AM. Reason: PROOF
    2008-02-28 10:30 AM
  2. scowler's Avatar
    I spotted the iClarified tutorial on unlocking the 1.1.4 with 4.04.05_G baseband earlier - it uses a modded ziphone ( downloadable from the tutorial page on iclarified ).

    I can confirm its just worked perfectly on two BL 3.9 iphones I have.

    There appears to be an issue with the sound volume at first but a reboot of the phone cures this.
    Never knowingly understood.
    2008-02-28 10:38 AM
  3. mavericksane's Avatar
    This process worked fine on my BL3.9 phone. The alternative to using ZiPhone is to download Installer and install it into Applications using INdependence - this you would do after installing SSH. Then SSH into your iPhone and:

    chmod 777 /Applications
    chmod 777 /Applications/Installer.app
    chmod 777 /Applications/Installer.app/Installer
    chmod ug+s /Applications/Installer.app/Installer

    This allows Installer to run as root. From there, install the iClarified source, BSD Subsystem 2.1 and BSD Subsystem Term Fix, then install Unlock 1.1.4 from the iClarified source as above.

    I went this route as I found that carrying out a restore to 1.1.4 in iTunes gave me the new baseband - unlocking via INdependence downgraded the baseband to 04.02.13 (i.e., firmware 1.1.2 baseband) - the iClarified unlock maintains the new baseband.
    2008-02-28 05:42 PM
  4. pajarojamal@gmail.com's Avatar
    Or you can just download the latest Independence and Ziphone, Activate your 1.1.4 phone with Independence once done quit and reopen Independence, this is very important because if you don't and you try to use Simunlock it will continue to say jailbreak sucessful, once you reopen Independence press Simunlock, and give it a minute and than it will be complete. After Simunlock is done quit Independence and open up Ziphone and press jailbreak and that will install installer let it finish and when its done you got an activated iPhone that can be used with any carrier, and have installer on your iPhone.
    Last edited by [email protected]; 2008-02-29 at 02:54 AM.
    2008-02-29 02:49 AM
  5. Oranges's Avatar
    For those that have the 4.6 BL and want to retain it. I have confirmed of a way to JB, UL, nd active, 1.1.4.

    1.Use indepences to activate It will automatically jailbrake it as well).
    Do not use the unlock feature in independence, because it will in a way disable cellular reception and will give you a no service messege where the signal strength is.

    2.Use ziphone to only unlock the phone. The indepenence version of jailbreak won't install installer automatically, so you can install it manually through SSH (must be installed with independence). Or use ziphone's jaolbreak to do it.

    Then your 1.1.4 with 4.6BL is unlocked JB and activated.
    2008-02-29 04:31 AM
  6. cWanja's Avatar
    Or you can just download the latest Independence and Ziphone, Activate your 1.1.4 phone with Independence once done quit and reopen Independence, this is very important because if you don't and you try to use Simunlock it will continue to say jailbreak sucessful, once you reopen Independence press Simunlock, and give it a minute and than it will be complete. After Simunlock is done quit Independence and open up Ziphone and press jailbreak and that will install installer let it finish and when its done you got an activated iPhone that can be used with any carrier, and have installer on your iPhone.
    Yes but the iNdependence method downgrades your baseband to 4.02.13_G (1.1.2) which means you can not use the LocateMe feature in GMaps. You will have all the current firmware, but your baseband will be jacked up. Easiest way to fix it if you have done this; go to Installer and install "Unlock 1.1.4" from the iClearified source.
    Chris 'cWanja' Wanja
    [email protected]
     Apple Genius - Retail
    Do not forget to "thank me" for helping!
    2008-03-01 03:40 PM
LINK TO POST COPIED TO CLIPBOARD