User Tag List

  1. shivathreya's Avatar

    I updated 1st gen iPhone from 2.1 to 2.2 using pwnage for mac.

    However, after that Cydia doesn't download any package through wi-fi. It stops and then it doesn't install. It says return to cydia.

    However, it downloads through GPRS.

    I tried command line apt-get. It also stops.


    2008-11-28 12:22 PM
  2. drewc's Avatar
    2008-11-28 01:47 PM
  3. hiflyer's Avatar
    Try running quickpwn for mac. That fixes most cydia problems.
    2008-11-29 11:43 PM
  4. shivathreya's Avatar
    It doesn't look like a cydia issue.

    Generally the wifi is slow in 2.2

    Even emails through wifi takes lot of time.

    When I ping my iPhone either it times out or the latency is more than 5 seconds (not milliseconds).

    Now I have downgraded to 2.1 and things are back to normal.

    2008-11-30 06:37 AM
  5. m.z.s's Avatar
    i did uprade my 2g iphone to v2.2 using qiuckpwn for windows but still did not get any signal on my wifi ......
    i can not install naything throuh Cydia any help.......
    2008-11-30 06:47 PM
  6. Alperovich's Avatar
    /\ try it again, *restore*, now jailbreak/unlock using quickpwn. now, it could be activated and itunes will ask to restore settings form back up, don't use your back up b/c it could be corrupt just setup as new iphone.
    2008-11-30 07:15 PM
  7. shivathreya's Avatar

    Thanks for your help.

    I am in 2.1. Now I should restore to 2.2 or 2.1. In DFU mode or Normal Mode or Restore Mode?

    2008-12-05 02:23 PM
  8. oranges2's Avatar
    I'm having this same problem!
    2008-12-20 10:31 AM
  9. shivathreya's Avatar
    This problem doesn't occur in iPhone 1st gen that is released first (i.e < 45 in IMEI).

    I upgraded a very old iphone and its working fine. But 2 phones with IMEI > 45 (6&7th digits) saw this symptom.


    I did some R&D.

    I Pinged the iPhone continuously and toggled wifi.

    When the connection is created in iPhone, it pings perfectly and the response time in 2 to 3 ms. After a few packets (7 to 10 packets) it times out or response time is more than 600 or 2000 ms.


    Just pasting the output.

    64 bytes from icmp_seq=418 ttl=64 time=3.049 ms
    64 bytes from icmp_seq=419 ttl=64 time=2.537 ms
    64 bytes from icmp_seq=420 ttl=64 time=4.542 ms
    64 bytes from icmp_seq=421 ttl=64 time=3.298 ms
    64 bytes from icmp_seq=422 ttl=64 time=2.353 ms
    64 bytes from icmp_seq=423 ttl=64 time=2.311 ms
    64 bytes from icmp_seq=424 ttl=64 time=3.553 ms
    64 bytes from icmp_seq=425 ttl=64 time=2.719 ms
    64 bytes from icmp_seq=426 ttl=64 time=2.270 ms
    64 bytes from icmp_seq=452 ttl=64 time=3.724 ms
    64 bytes from icmp_seq=453 ttl=64 time=6.065 ms
    64 bytes from icmp_seq=454 ttl=64 time=4.418 ms
    64 bytes from icmp_seq=455 ttl=64 time=2.985 ms
    64 bytes from icmp_seq=456 ttl=64 time=3.903 ms
    64 bytes from icmp_seq=457 ttl=64 time=29019.828 ms
    64 bytes from icmp_seq=458 ttl=64 time=28022.026 ms
    64 bytes from icmp_seq=459 ttl=64 time=27023.379 ms
    64 bytes from icmp_seq=460 ttl=64 time=26024.810 ms
    64 bytes from icmp_seq=461 ttl=64 time=25025.887 ms
    64 bytes from icmp_seq=462 ttl=64 time=24027.024 ms
    64 bytes from icmp_seq=463 ttl=64 time=23028.093 ms
    64 bytes from icmp_seq=464 ttl=64 time=22032.549 ms
    Last edited by shivathreya; 2008-12-20 at 04:01 PM. Reason: Automerged Doublepost
    2008-12-20 04:01 PM
  10. shivathreya's Avatar
    Why no reply? Has anybody seen this issue?

    2009-01-06 01:15 PM
  11. shivathreya's Avatar
    Same issue with 2.2.1

    2009-02-15 03:05 AM

Tags for this Thread